RFIDReader.com

The Speedway xPortal, an integrated portal reader, incorporates the industry-leading Speedway Revolution RFID reader and Impinj's Dual-Linear Phased Array (DLPA) antenna technology, yielding the industry's smallest, most flexible, and cost-effective RFID portal solution.

Impinj's solves the size and mounting limitations of traditional portals with an attractive, light-weight, and low-profile unit. Measuring approximately 30.5 x 8.75 x 2 in (77.5 x 22.2 x 5 cm) and weighing less than 10 lbs (4.5 kg), its compact form is unobtrusive, streamlined, and ultimately flexible, yet delivers better performance than larger, more costly industrial-scale portals.

Speedway xPortal RFID Reader

The Speedway xPortal RFID reader integrates high-performance, Impinj-designed DLPA antenna technology with beam switching and polarization attributes that are dynamically managed by the reader, providing consistent and broad coverage of the read zone.

Designed for retail, office, hospital, and other indoor environments, the Speedway xPortal RFID reader is ideal for monitoring tagged items, pallets, equipment, files, or people passing through doorways, hallways, or other zonal coverage areas. 

The Speedway xPortal's clean appearance and multiple mounting options complement and enable a myriad of installation requirements.

Impinj Speedway xPortal At A Glance

• Air Interface Protocols EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
• Supported Regions or Geographies - US, Canada and other regions following US FCC Part 15 regulations (902 928 MHz)
• Europe and other regions following ETSI EN 302 208 without LBT regulations (865 868 MHz)
• Antennas Dual-linear phased array antenna technology
• Antenna Performance Maximum radiated power allowed by regulatory region (FCC 4W EIRP, ETSI 2W ERP)
• HPBW (x-z plane) 60  +/- 3 (3dB beam width)
• HPBW (y-z plane) 80  +/- 3 (3dB beam width)
• Radome High impact strength, UV, chemical and cleaning solution resistant
• Transmit Power +10 to +30 dBm
• Max Receive Sensitivity -82 dBm
• Application Interface EPCglobal Low Level Reader Protocol (LLRP) v1.0.1
• Network Connectivity 10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)
• IP Address Configuration DHCP, Static, or Link local Addressing (LLA) with Multicast DNS (mDNS)
• Time Sychronization Network Time Protocol (NTP)

Management Interfaces

• Impinj Web Management UI
• Impinj RShell Management Console using serial management console port, telnet or SSH
• SNMPv2 MIBII
• EPCglobal Reader Management v1.0.1
• Syslog

Reliable Firmware Upgrade

• Dual image partitions enable smooth transition to new firmware while the reader is still operating
• Scalable upgrade mechanism enabling simultaneous scheduled upgrades of multiple readers
• USB Flash Drive
•  Impinj Web Management Interface

Power Sources

• Power over Ethernet (PoE) IEEE 802.3af
• +24 VDC @ 800 mA via external universal power supply with locking connector sold separately

Environmental Sealing  IEC IP52Operating Temperature -20 C to +50 C
Humidity 5% to 95%, non-condensing
Dimensions (H x W x D) 30.5 x 8.75 x 2 in (77.5 x 22.2 x 5 cm)
Weight 10 lbs (4.5 kg)

Mounting Options

 Keyhole slots, clearance holes, and integrated threaded fasteners
100 mm and 75 mm VESA mount
Conduit knockouts for easy termination of conduit
Pass-through knockouts on back for data and power cabling 

RoHS Compliant to European Union directive 2002/95/EC

This product is covered by one or more of the following U.S. patents. Other patents pending. 7283037, 7026935, 7049964, 7501953, 7030786, 7246751, 7245213, 7408466, 7187290, 7304579, 7510117, 7107022, 7419096, 7382257, 7405660, 7436308, 7417548, 7391329, 7391329, 7592897, 7589618

Datasheet