RFIDReader.com

RFIDReader.com

RFID READERS FROM THE TOP MANUFACTURERS

Other RFID Solutions

Speedway Revolution RFID Reader - 4 Port

Four Port Revolution RFID Reader

Request Quote

Speedway Revolution RFID Reader

Application environments are dynamic. Everything from RF interference, tag quantity, and ambient RF noise to building materials near an RFID installation affect system performance. Most users configure their RFID readers for worst case scenarios, often compromising best performance in the process.
With its innovative Autopilot features, Impinj's Speedway Revolution RFID reader delivers peak performance all day, every day.

Superior Performance Made Easy

With Autopilot, a set of unique firmware features work together to automatically optimize the RFID reader's operation for its environment:

  • Autoset continuously optimizes the reader's configuration for the best, most reliable performance
  • Low duty cycle reduces RF interference, power consumption, and energy costs
  • Dynamic antenna switching improves throughput and helps the reader work more efficiently

The Speedway Revolution RFID reader also delivers increased application flexibility via support for Power over Ethernet (PoE), which simplifies deployment and dramatically reduces cost by eliminating the need for AC outlet installation at read points.

And this revolutionary RFID reader improves upon the advanced hardware capabilities that made the original Speedway the reader of choice for many demanding customers capabilities such as best receive sensitivity, interference rejection, and item-level carrier cancellation.

Impinj, defining the future of RFID, where superior performance comes easy.

Impinj's Speedway Revolution RFID reader with Autopilot senses its environment, automatically configuring and adapting to new and changing conditions. Available in two- and four-port versions.
Speedway Revolution RFID Reader

Air Interface Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C

Supported Regions and Geographies

  • US, Canada, and other regions following US FCC Part 15 regulations
  • Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
  • Brazil, Hong Kong, India, Uruguay, Vietnam
  • Pending regulatory approval -  Australia, China, Malaysia, Singapore, Taiwan, and Thailand

Transmit Power

  • +10.0 to +30.0 dBm (PoE) 
  • +10.0 to +32.5 dBm1 (external universal power supply) 

Max Receive Sensitivity

-82 dBm

Max Return Loss

10 dB

Application Interface

EPCglobal Low Level Reader Protocol (LLRP) v1.0.1

Network Connectivity

10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)

Cellular Connectivity*

  • Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)
  • Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)

(* Available through Impinj-authorized partners)

IP Address Configuration

DHCP, Static, or Link local Addressing (LLA) with Multicast DNS (mDNS)

Time Sychronization

Network Time Protocol (NTP)

Management Interfaces

  • Impinj Web Management UI
  • Impinj RShell Management Console using serial management console port, telnet or SSH 
  • SNMPv2 MIBII 
  • EPCglobal Reader Management v1.0.1 
  • Syslog 

Reliable Firmware Upgrade

  • Dual image partitions enable smooth transition to new firmware while the reader is still operating 
  • Scalable upgrade mechanism enabling simultaneous scheduled upgrades of multiple reader
  • USB Flash Drive
  • Impinj Web Management UI
      

Management Console

  • RS-232 using a standard Cisco-style management Cable (DB-9 to RJ-45) 
  • Baud rate: 115200; Data: 8 bit; Parity: none; Stop: 1 bit; Flow control: none 

USB

  •  USB 1.1 Device (Type B) and Host (Type A) ports 
  •  USB Virtual COM Serial Port and USB drive support for embedded applications 

GPIO

  • 4 inputs, optically isolated, 0-30V 
  • 4 outputs, optically isolated, 0-30V, non-isolated 5V, 100 mA supply (DB-15) 

Power Sources

  • Power over Ethernet (PoE) IEEE 802.3af 
  • +24 VDC @ 800 mA via external universal power supply with locking connector sold separately 

Environmental Sealing

IEC IP52

Shock and Vibration

Mil-Std-810G Certified

Operating Temperature

-20 C to +50  C

Humidity

5% to 95%, non-condensing

Dimensions (H x W x D)

7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)

Weight

1.5 lbs (0.68kg)

RoHS

Compliant to European Union directive 2002/95/EC

This product is covered by one or more of the following U.S. patents.Other patents pending. 7283037, 7026935, 7049964, 7501953, 7030786, 7246751,7245213, 7408466, 7187290, 7304579, 7510117, 7107022, 7419096, 7382257,7405660, 7436308, 7417548, 7391329, 7391329, 7592897, 7589618

More products from Impinj

printable version

Home | Login